Vehicle Detection Systems

Professional vehicle detection systems for barriers, gate automation, and parking management — induction loop detectors, magnetoresistive sensors, and ultrasonic detection for applications across Europe.

1-Channel Loop Detector ULT-MVP-E — Multi-Voltage Vehicle Detection

• Multi-voltage 12–240V
• Detect-On-Stop™ technology
• Fast installation & tuning

2-Channel Loop Detector ULT-MVP-2E — Multi-Voltage Vehicle Detection

• Multi-voltage 12–240V
• AB Logic direction detection
• Detect-On-Stop™ technology

MVP D-TEK Universal Loop Detector, 9-240V AC/DC

• Universal supply range, 9V to 240V AC/DC
• Fail-safe or fail-secure configurable
• Enhanced lightning and surge protection

USB-LP-2 Dual-Channel Loop Detector with USB Interface

• Two independent detection channels, four relay outputs
• USB interface for real-time settings and monitoring
• AB Logic direction detection and DETECT-ON-STOP

Plug-in Loop Detector ULT-PLG — Gate Operator Board Replacement

• Plug-in, directly compatible
• Detect-On-Stop™ technology
• Fast replacement, no rewiring

DIN-Rail Loop Detector ULT-DIN — Compact Vehicle Detection for Control Cabinets

• DIN-rail mounting
• Detect-On-Stop™ technology
• Compact for control cabinets

LP D-TEK Low-Power Loop Detector

• Only 9 mA current draw, ideal for solar power
• Wide compatibility with loop inductances, 20-2000 µH
• Fail-safe or fail-secure configurable

Vehicle Detection Sensor CS303 — Magnetoresistive Sensor without Saw-Cutting

• Magnetoresistive technology
• No full loop required
• IP69K waterproof

Vehicle Detection Sensor CS303-FP — Single Saw-Cut Flat Pack Version

• Single saw-cut installation
• Compact flat pack housing
• Fast to install for retrofit

Vehicle Detection Sensor CS303-DB — Underground Direct Burial Version

• Direct burial installation
• 3-axis magnetoresistive detection
• IP69K waterproof

Magnetic Vehicle Detector CS202-50 — Ultra-Low Power Consumption

• Ultra-low power (0.25mA)
• Direct burial probe 15/30m
• Form C relay output

MRD-1P Radar Presence Sensor for Barrier Arms

• Radar detection up to 10 metres, adjustable in 30 cm increments
• Response time of roughly 30 ms
• Two relay outputs: presence and pulse-on-entry/exit

Drive-Thru Vehicle Detector USVD-4X — Ultrasonic Detection without a Loop

• Ultrasonic detection (TPA)
• No induction loop needed
• NEMA 4X housing

DAK-USVD Drive-Thru Alert Kit with Chime

• Ultrasonic detection, no inductive loop or digging
• Adjustable chime volume up to 100 dBA, six alert tones
• Pulse on entry, exit, or both, with adjustable delay

DAK-2ULTMVP Dual-Zone Drive-Thru Alert Kit

• Two ready-made detection zones, pre-wired
• Multi-voltage loop detectors, 12 VDC to 240 VAC
• Detection only once stopped, ignores passing traffic

Vehicle Motion Detector VMD202 — Free-Exit Sensor with 15/30m Cable

• Free-exit detection, no loop needed
• Pre-terminated 15/30m cable
• Low power, solar-ready

Programming Module VMD202-R — Setup Module for VMD202 Motion Detector

• Plug-in programming interface
• Settings stored in the VMD202
• Compact and reusable

Vehicle Motion Detector CS101-LV — Low-Voltage Free-Exit Sensor

• Low-voltage 9–41VDC/6–29VAC
• Waterproof sensing probe
• Free-exit motion detection

IRB-MON2 Universal Monitored Photoeye Kit (UL325)

• UL325 compliant, four monitoring protocols supported
• Thru-beam range 35 metres LED alignment indicator
• Also compatible with non-monitored, legacy systems

Infrared Photoeye Set IRB-MON — UL325 Safety Photoeye up to 35m

• UL325-certified
• Range up to 35m
• Lensless technology

IRB-RET2 Universal Retroreflective Photoeye (UL325)

• Wiring on just one side, no cables to the far side
• UL325 compliant, six monitoring protocols supported
• Range up to 18m, stealth mode for discreet installation

IRB-325 UL325 Infrared Photoeye Kit with Steel Protective Hoods

• Powder-coated steel protective hoods against impact
• UL325 compliant, NC monitoring
• Range up to 20 metres, temperature range -40°C to +77°C

NIR-50-325 Compact Retroreflective Photoeye (UL325)

• Compact size, suited to tight mounting positions
• UL325 compliant, NC and 10K monitoring
• Wide voltage range, IP66 watertight

IRB-4X2 Infrared Photoeye Kit (Thru-Beam)

• Lens-free design, less sensitive to fog, dust and sunlight
• Thru-beam range up to 35 metres, wide alignment tolerance
• Compatible with virtually any control board

NIR-50 Retroreflective Photoeye, Non-Monitored

• Wide voltage range, 12-240V AC/DC
• Low power draw of 28 mA, ideal for solar power
• Retroreflective, no wiring to the far side needed

NIR Retroreflective Photoeye, Standard Range

• Standard range up to 9 metres, cost-effective entry option
• Wide voltage range, 12-240V AC/DC
• Retroreflective, no wiring to the far side needed

BPE-50 Thru-Beam Photoeye with Battery-Powered Transmitter

• Battery-powered transmitter, one-sided wiring only
• Up to 2 years battery life, 90-degree alignment tolerance
• Compact footprint, range up to 15 metres

PC-3 Infrared Photoeye, Entry-Level Model

• No calibration or sensitivity adjustment required
• Fail-safe: automatic "open" signal on power failure
• Wide 24-degree detection angle

Explosion-Proof Photoeye IRB-EXP — ATEX Infrared Sensor

• ATEX-rated (EExd IIC)
• NEMA 4 & 7 housing
• Range up to 35m

WEL-200 Wireless Safety Edge Link

• Wireless link, no wiring to a moving part
• UL325 compliant, compatible with 8.2K and 10K safety edges
• Range up to 60 metres, up to 4 transmitters per receiver

SP-24 Surface-Mounted Loop Pad for Car Washes

• Resistant to car wash chemicals, polypropylene housing
• Surface-mounted, no digging or saw-cutting
• Works with any separately purchased loop detector from the range

Universal Photoeye Mounting Solutions: PhotoeyeVault & 325-POST-2

• PhotoeyeVault: enclosed, vandal-resistant housing
• 325-POST-2: lightweight, fast-to-mount open post
• 325-POST-2 is the only mounting option for the MRD-1P